Search
JEEP PARTS ONLY
JEEP PARTS ONLY

Shopping Cart
Your cart is empty.



Browse Categories
JEEP Model, Year, and Engine We ONLY SUPPORT those vehicles and engines listed below. Grand Cherokee: No Products

A2569-2, Classic Polyurethane 2" Motor Mount Lifts


Price: $129.95
SALE PRICE: $116.96
You Save: $12.99
AVAILABLE
Part Number: A2569-2
Includes: Everything shown plus 1 sticker
Made in USA: Using USA steel, bushings, hardware, etc.
Warranty: Lifetime - Except bushings

Do I need a 1.5" or 2" MML?
Probably not.  Some abnormal circumstances in which 1.5" or 2" MMLs may be useful include extreme suspension lift, custom frames, custom engine installations, or bodies that require a particular engine position due to an out-of-the-ordinary configuration. Most typical suspension lifts (up to about 6") and other common modifications of stock vehicles do not fall in this category.  

If you are considering installing a 1.5" or 2" MML,
 • Please check for enough clearance between the bell housing and floor pan.
 • Also check for enough clearance between the valve cover and the hood; this can be done by putting a ball of modeling clay on the highest part of the valve cover and closing the hood (measure the resulting ball).  
 • Remember, you're moving the entire engine assembly 2" upward at the radiator fan.
 • Do all of the research and homework you can.  Call us, or chat with people on Jeep Forum or NAXJA.  Find people who have done it, or those who have considered it.  This is not your everyday modification.  Be sure you know what you are doing.

Jeep Motor Mount Lifts, 2" (Pair)
Want Jeep motor mount lifts (MMLs) to help correct drive-line angle caused by an extreme suspension lift? Have an abnormal modification that's impacted drive-line angle? Brown Dog designed these motor mount lifts to reposition your engine two inches higher than stock (at the cooling fan). This modification results in a dramatic change in the drive-line angle. Save yourself some time and call to discuss your rig setup prior to order these.

High Performance Design.
The Brown Dog has friends who experienced a sagging engine on their early Wrangler YJ. This is why we engineered these replacement motor mounts for extreme strength. You'll find these mounts a serious upgrade from most aftermarket mounts, too. We use plate steel and double-weld joints to provide the most strength possible. And, just to make sure, we periodically pull one off the shelf and put it
through our 20-Ton Press Test. We have never seen a structural failure on Brown Dog mounts.

Featuring Classic Polyurethane Bushings.
The Classic Polyurethane bushings in this set of Brown Dog motor mounts will give your rig a sportier feel. If the bushings ever start to wear, replacements are available from Brown Dog Offroad. Prefer Ultra-Flex Rubber bushings? We offer all motor mounts and motor mount lifts with either polyurethane or rubber to match your preference. Not sure which is for you? Click here.
 
Installation Notes.
  • Before ordering these MML, check other components under the hood to be sure you have enough room for a 2" MML.
  • Engine will be raised 2" at the stock cooling fan.
  • Motor mount lifts bolt directly to the frame-side bracket (pylon) in the same position as the stock mounts.
  • These are not for most setups. In fact, these are rarely installed. Call prior to placing order to be sure these will work for you.

Application Notes

  • Jeep Wrangler YJ, 4-Cylinder, 1987-1990
Backed by Brown Dog Promise.
Brown Dog motor mounts will be the last set of mounts you'll need. The Brown Dog gives you his promise.