CU2883-1, 1" Motor Mount Lifts, Ultra-Flex Rubber

Price: $104.95

Part Number: CU2883-1

Includes: Everything shown plus 1 sticker

Shipping: Free - USA & APO/FPO (military)

Warranty: Lifetime - Except bushings

Made in USA by: Brown Dog Industries

Quantity:

CU2883-1, Ultra-Flex Rubber 1" Motor Mount Lifts (Pair)

Want Jeep motor mount lifts (MMLs) to help correct driveline angle caused by an extreme suspension lift? Doing a tummy tuck or other modification that's impacting drive-line angle? Brown Dog designed these MML to reposition your engine one inch higher than stock (at the cooling fan). This modification results in a change in the driveline angle.

High Performance Design.
The Brown Dog experienced a sagging engine on his own Wrangler. This is why we engineered these replacement MML for extreme strength. You'll find these mounts a serious upgrade from most others, too. We use plate steel and double-weld joints to provide the most strength possible. And, just to make sure, we periodically pull one off the shelf and put it through our 20-Ton Press Test. We have never seen a structural failure on Brown Dog mounts.

Featuring Ultra-Flex Rubber Bushings.

These Brown Dog motor mounts feature Ultra-Flex Rubber bushings designed to dampen drive-train vibration. If this is your daily driver, you may find these bushings well worth the extra money. Should you ever need to replace the bushings, well have them. Prefer Classic Polyurethane bushings? We offer all motor mounts and motor mount lifts with either polyurethane or rubber to match your preference. Not sure which is for you? Click here.

Backed by Brown Dog Promise.
Brown Dog motor mounts will be the last set of mounts you'll need. The Brown Dog gives you his promise.

Free Shipping.
All products ship free to all USA and APO/FPO addresses. International customers pay reasonable shipping fee. Never a "handling fee." Click here for shipping policy.

Installation Notes

4.0L engine is lifted 1" at stock cooling fan.
Mounts bolt directly to the pylons (frame-side brackets) and slides into original Jeep 4.0L engine brackets with no grinding or trimming.
Carefully inspect engine brackets for any excess wear, especially cracks. The original brackets weren't designed to handle the strength of these high-performance motor mounts. If engine brackets need replaced, please consider upgrading to the appropriate kit for your vehicle and engine. All Brown Dog Offroad kits include both Motor Mount Lifts and both Engine Brackets.
You may experience minor interference between the MML and the original Jeep engine bracket lip. If this occurs, we suggest grinding the lip until the lift clears. Or you may wish to consider installing Brown Dog lipless engine brackets when you install the MMLs. If so, please order appropriate kit above. (Note: Original Jeep brackets do not interfere with Brown Dog stock-height MM.)
Tighten through-bolts (bolt that goes through bracket arms and motor mount) snug. Do NOT over-tighten locknuts on through-bolts.
Bolts to pylons should be tightened like most others on your Jeep frame. Nice and tight.
If you have any questions during installation or believe a part will not fit, do NOT alter the part. Call Brown Dog, 866 401-3877. We have extended support to assist with installation.

Application Notes

Fits Jeep vehicles below.

Jeep Wrangler TJ, 6-Cylinder, 4.0L, 242ci, 1997-2006