Shopping Cart
Your cart is empty.

Browse Categories
JEEP Model, Year, and Engine We currently ONLY SUPPORT those vehicles listed below. Grand Cherokee: No Products

CU2883-2, 2" Motor Mount Lifts, Ultra-Flex Rubber

Price: $134.95
Part Number: CU2883-2
Includes: Everything shown plus 1 sticker
Made in USA: Using USA steel, bushings, hardware, etc.
Warranty: Lifetime - Except bushings
CU2883-2, Wrangler TJ and LJ 2" Ultra-Flex Rubber Motor Mount Lifts (Pair)  
Want Jeep motor mount lifts (MMLs) to help correct driveline angle caused by an extreme suspension lift? Have an abnormal modification that's impacted driveline angle? Brown Dog designed these 2" MML to reposition your engine two inches higher than stock (at the cooling fan). This modification results in a dramatic change in the driveline angle. If you're not sure whether to order 1" or 2" MML for your rig, call or email us.


High Performance Design.
The Brown Dog experienced a sagging engine on his own Wrangler YJ. This is why we engineered these replacement motor mounts for extreme strength. You'll find these mounts a serious upgrade from most others, too. We use plate steel and double-weld joints to provide the most strength possible. And, just to make sure, we periodically pull one off the shelf and put it through our 20-Ton Press Test. We have never seen a structural failure on Brown Dog mounts.

Featuring Ultra-Flex Rubber Bushings.

These proprietary Ultra-Flex Rubber bushings were designed to dampen drive-train vibration. If this is your daily driver, you may find these bushings well worth the extra money. If the bushings ever start to wear, replacements are available from Brown Dog Offroad. Prefer Classic Polyurethane bushings? We offer all motor mounts and motor mount lifts with either polyurethane or rubber to match your preference. Not sure which is for you? Click here.


Backed by Brown Dog Promise.
Brown Dog motor mounts will be the last set of mounts you'll need. The Brown Dog gives you his promise.


Installation Notes

  • Jeee Wrangler TJ or LJ 4.0L engine will be raised 2" at the stock cooling fan.
  • Mounts bolt directly to the pylons (frame-side brackets), in the identical position of the stock mounts. Recommended for use with Brown Dog engine brackets (see below).
  • You will experience significant interference between 2" MMLs and the original engine bracket lips. Significant grinding on the original engine bracket lip will be required so the 2" MML clears. To avoid engine bracket modification we suggest upgrading to Brown Dog lipless Engine Brackets when you install the MMLs. See upgrade kits below. (Note: Original Jeep brackets will NOT interfere with Brown Dog MMs and have minimal interference with 1" MMLs.)
  • If engine bracket to block bolts are broken or have sheared the thread boss, please consider our Super Engine Brackets. Even if you don't have a sheared block bolt, yet, you may wish to install our Super Engine Brackets when installing Brown Dog motor mount lifts.  Our S2572-2 (1991-1999 4.0L Wrangler) and S2883-2 (2000-2006 4.0L Wrangler) include both motor mount lifts and both engine brackets.
  • Tighten through-bolts (bolt that goes through bracket arms and motor mount) snug. Do NOT over-tighten locknuts on through-bolts.
  • Bolts to pylons should be tightened like most others on your Jeep frame. Nice and tight.
  • If you have any questions during installation or believe a part will not fit, do NOT alter the part. Call Brown Dog, 866 401-3877. We have extended support to assist with installation.

Application Notes  

  • Jeep Wrangler TJ and LJ, 6-Cylinder, 4.0L, 242ci, 1997-2006