S2883-2, Super Kit, 2" Engine Lift, Classic Polyurethane

Your Price: $519.95

AVAILABLE

Part Number: S2883-2

Includes: Pair 2" Motor Mount Lifts, both Super Engine Brackets, all hardware, 1 sticker

Made in USA: Using USA steel, bushings, hardware, etc.

Warranty: Lifetime - Except bushings

Note: Mounts, brackets also available separately

Quantity:

Add to a new shopping list

Email this page to a friend

Do I need a 1.5" or 2" MML?
Probably not. Some abnormal circumstances in which 1.5" or 2" MMLs may be useful include extreme suspension lift, custom frames, custom engine installations, or bodies that require a particular engine position due to an out-of-the-ordinary configuration. Most typical suspension lifts (up to about 6") and other common modifications of stock vehicles do not fall in this category.

If you are considering installing a 1.5" or 2" MML,
Please check for enough clearance between the bell housing and floor pan.
Also check for enough clearance between the valve cover and the hood; this can be done by putting a ball of modeling clay on the highest part of the valve cover and closing the hood (measure the resulting ball).
Remember, you're moving the entire engine assembly 2" upward at the radiator fan.
Do all of the research and homework you can. Call us, or chat with people on Jeep Forum or NAXJA. Find people who have done it, or those who have considered it. This is not your everyday modification. Be sure you know what you are doing.

Super Kit: Includes Super Engine Brackets and Classic Polyurethane 2" Motor Mount Lifts for 2000-2006 4.0L Jeep TJ and LJ

For the rig with extreme modifications. To assure this kit is correct for your rig, please call prior to placing order. If you do not call us, we'll call you prior to making it for you.

Super Strong Engine Brackets - 7 Bolts, Left; 6 Bolts, Right
High Performance Classic Polyurethane 2" Motor Mount Lifts - Raises engine 2" at cooling fan.
All Grade 8 Hardware or 10.9 Metric Equivalent.

Super Engine Brackets virtually eliminate offroad torsional forces snapping bolts or ripping the bracket from the case. Featuring more attach points than the original brackets, the design spreads the stress load on the engine block bolts. Left bracket features seven bolts, four more than the original. Right bracket features six bolts, three more than the original. Double-welded, all-steel construction for extra strength. No engine block modification necessary. Fits up to existing 4.0L engine block bolt pattern originally found on 2000-2006 Jeep Wrangler TJ and LJ.

Classic Polyurethane 2" Motor Mount Lifts feature all-steel, double-welded construction. Lifting engine 2" above stock at the cooling fan, these bolt directly to the original mount location. Designed to stand up to the toughest trails Arizona can dish out. (Sorry Utah, we can't stand the cold.) When compared to others, these are a substantial upgrade.

Ships with Grade 8 Hardware (or 10.9 metric equivalent) required to bolt engine brackets to existing engine block bolt pattern. Also includes new Grade 8 thru-bolts, lock nuts and washers for securing brackets to motor mounts.

Application Notes

Wrangler TJ and LJ, 4.0L I-6, 2000-2006

Installation Notes

In preparation for installation, we suggest using Naval Jelly or PB Blaster with a spiral wire brush to clean out the additional engine block thread bosses.
Since M10 and 3/8 thread bosses are very, very similar, we do not suggest re-tapping holes.
A copy of the installation instructions showing which holes take which bolts will be included with your bracket. We can also email it ahead of time when requested.