| | |
| JEEP PARTS ONLY
JEEP PARTS ONLY | |
| | |
|
JEEP Model, Year, and Engine
We ONLY SUPPORT those vehicles and engines listed below.
Grand Cherokee: No Products |
|
B2569-LH, Engine Bracket, Left

Header engine bracket for left side 2.5L Jeep YJ and TJ.  |
|
AVAILABLE
Part Number: B2569-LH
Includes: Everything shown plus 1 sticker Made in USA: Using USA steel, bushings, hardware, etc. Warranty: Lifetime
|
Brown Dog Left Engine Bracket for 2.5L, 2.4L 4 cylinder Jeep. One of the leading causes of cracked headers: worn motor mounts and cracked/worn brackets. The Brown Dog bracket design offers a little more room in the exhaust area to assure no conflict. Why risk cracking a header when you could hold your engine and header securely in place with Brown Dog motor mounts and header brackets. Bracket made of all steel and features double-welds. Engineered for use with stock-height motor mounts (MMs) or 1" or 2" motor mount lifts (MMLs). Unique lipless bracket design will not interfere with installation of 1" or 2" MMLs. For use with original style or Brown Dog motor mounts. While this bracket can be used with strap-style (original Jeep style) motor mounts, we strongly recommend upgrading to the Brown Dog's High-Performance Motor Mount when converting to this bracket. Stock mounts designed for street driving will simply not hold up to offroad driving. If you want to use original-style motor mounts with this bracket on a 2.5L YJ, you need to use a 2.5L TJ motor mount. Our 2.5L engine brackets are made to accept the motor mount width Jeep eventually settled on. Thus, the need for a TJ motor mount on a YJ when using this bracket. Since we know first-hand how much fun it is the change motor mounts and engine brackets, we suggest you change the entire engine mounting system at once. And never have to do it again. Upgrade Kits listed below. Classic Polyurethane Upgrade Kits with Cradle (2.5L engines) -
X2569-0H, includes engine brackets, motor mounts, and cradle for driver-side mount. -
X2569-1H, includes engine brackets, 1" MML, and cradle for driver-side motor mount lift. -
X2569-2H, includes engine brackets, 2" MML, and cradle for driver-side motor mount lift. Ultra-Flex Rubber Upgrade Kits with Cradle (2.5L engines) -
XU2569-0H, includes engine brackets, motor mounts, and cradle for driver-side mount. -
XU2569-1H, includes engine brackets, 1" MML, and cradle for driver-side motor mount lift. -
XU2569-2H, includes engine brackets, 2" MML, and cradle for driver-side motor mount lift 1997 and later Jeep XJ, MJ, and TJ do NOT need a cradle under the right mount, order -
K2569-0H, K2569-1H, or K2569-2H Series, Classic Polyurethane. -
KU2569-0H, KU2569-1H, KU2569-2H Series, Ultra-Flex Rubber. Hardware The Brown Dog ships all new Grade 8 hardware for bolting bracket to engine block. (You'll remove and discard the threaded studs that hold your current bracket to the block, then use the same engine thread bosses with the new hardware we send.) All new Grade 8 through-bolts, lock nuts and washers are also shipped for securing bracket to motor mounts or motor mount lifts. Application Notes: Utilizes existing bolt pattern found on 2.5L (4 cylinder) Jeep engines shipped originally with -
Wrangler YJ, 2.5L I-4, 1991-1995* -
Cherokee XJ, 2.5L I-4, 1991-2000* -
Comanche MJ, 2.5L I-4, 1991-1992* -
Wrangler TJ, 2.5L I-4, 1997-2002 -
Wrangler TJ, 2.4L I-4, 2003-2006 * Note: If using original-style Jeep motor mounts, your replacement motor mount will need to be for a TJ (not YJ). |
|
|
|