| | |
| JEEP PARTS ONLY
JEEP PARTS ONLY | |
| | |
|
| JEEP Model, Year, and Engine
We ONLY SUPPORT those vehicles and engines listed below.
Grand Cherokee: No Products |
|
Brown Dog Offroad - Jeep Engine Mounts & Brackets
B2500-K4, Classic Bushing Polyurethane Kit - 1997-2006 2.5L Wrangler TJ
|
|
AVAILABLE
Part Number: B2500-K4
Includes: Everything shown plus 1 sticker
|
K4-Series Classic Polyurethane Bushing Kit for 1996-2006 2.5L and 2.4L Wrangler TJ.
This kit includes:
- 4 Replacement bushings
- 2 DOM sleeve
- 4 Press-on bushing retainers. We will pre-assemble the DOM sleeve and one of the bushing retainers. The other retainer will need to be pressed on the other end of the DOM sleeve after assembly into your mount. If you do not have access to a 10-ton press, we can send you exchange K4-mounts. To get exchange mounts, order this kit (1 kit) and two (2) cores charges (PN K-Series Core). The core charges will be added to your invoice. Core charges will be refunded when we receive your old mounts (cores) from you. If you have questions, please call 866-401-3877.
Brown Dog Ultra-Flex Rubber and Classic Polyurethane bushings are interchangeable. If you have rubber bushings and want a sportier ride, order the Classic Polyurethane kit (B2500-K4). If you have polyurethane bushings and want to absorb more drive-line vibration, order our proprietary Ultra-Flex Rubber bushing kit (BU2500-K4). All Brown Dog motor mounts and motor mount lifts are rebuildable with either rubber or polyurethane. Regardless which bushings you're using, take care to tighten through-bolt according to instructions. Never over-tighten through bolts when installing Brown Dog motor mounts.
Application
Replaces worn bushings in both sides of K-Series Brown Dog motor mounts and motor mount lifts:
- C2883-0K4 or CU2883-0K4 Brown Dog motor mounts on 2.5L and 2.4L TJ
- C2883-1K4 or CU2883-1K4 Brown Dog motor mount lifts on 2.5L and 2.4L TJ
Note: Brown Dog K4-Series motor mounts are typically purchased for use with original Jeep engine brackets. If you have Brown Dog Engine Brackets, do not order this kit. Order CU2500-C instead. If you're not sure what you have, email a picture of both your passenger and driver side Brown Dog motor mounts and we'll make sure you get the correct rebuild kit.
Order one kit per pair of mounts.
| |
|
|
|
|
Don't want to re-use the thru-bolts to connect your new Brown Dog motor mounts to the original Jeep engine brackets? This thru-bolt kit includes M10.9 through-bolts, all-metal locknuts (prevailing torque nuts), and washers.
|
|
|
|
|
|
|
|
|
|
For use when exchanging and not rebuilding the K-Side of Brown Dog K-Series motor mounts. We'll send you an exchange motor mount with the rebuild kit (PN B2500-K2 or BU2500-K2). When you send us your old mount (core), we'll refund this core charge.
|
|
|
|
|
|
|
|