| | |
| JEEP PARTS ONLY
JEEP PARTS ONLY | |
| | |
|
JEEP Model, Year, and Engine
We ONLY SUPPORT those vehicles and engines listed below.
Grand Cherokee: No Products |
|
K2569-1H, Engine Bracket and 1" Motor Mount Lift Upgrade Kit, Classic Polyurethane
|
AVAILABLE
Part Number: K2569-1H
Includes: Everything shown plus 1 sticker Made in USA: Using USA steel, bushings, hardware, etc. Warranty: Lifetime - Except bushings Note: Mounts, brackets also available separately
|
Upgrade Kit: Includes Both Engine Brackets and 1" Motor Mount Lifts Whether you are replacing broken or worn-out parts or upgrading before a part breaks, this kit won't leave you with a sagging engine miles from civilization. -
All Steel Engine Brackets -
High Performance Jeep 1" Motor Mount Lifts -
All Grade 8 Hardware or 10.9 Metric Equivalent All Steel Engine Brackets feature double-welded construction for extra strength. The cast aluminum bracket found on some 4-cylinder Jeep Wranglers and Cherokees are prone to failure under the torsional stresses associated with even "easy" offroad trails. Once you've seen a busted cast bracket, you'll know why we continue to use these for our own Wrangler. Identical bolt pattern to the original cast aluminum brackets. No engine block modification necessary. Fits 2.5L Jeep Chrysler engines. Lipless design will not interfere with installation of 1" Motor Mount Lifts. This eliminates possible grinding of lips found on the cast originals. Accepts all known aftermarket headers without interference. High Performance 1" Motor Mount Lifts feature all-steel, double-welded construction. These high-strength Motor Mount Lifts (MMLs) bolt into the same locations as the original Jeep motor mounts. Designed to stand up to the toughest trails Arizona can dish out. (Sorry Utah, we can't stand the cold.) The original mounts, designed for street driving, simply won't stand up to the torsional forces experienced offroad. Raises engine 1" at the stock cooling fan. Many customers use 1" MMLs to compensate for driveline angle issues caused by a suspension lift or other modification. Ships with Grade 8 Hardware(or 10.9 metric equivalent) required to bolt engine brackets to existing engine block bolt pattern. Also includes new Grade 8 thru-bolts, lock nuts and washers for securing brackets to motor mounts. Application Notes: This kit replaces everything from the pylon to the block, both left/driver and right/passenger sides. Motor mounts bolt to pylon in same position, using same bolt holes, as original configuration. Engine brackets utilize existing bolt pattern found on 2.5L and 2.4L (4 cylinder) Chrysler engines shipped originally with: - Wrangler YJ, 1991-1995 (also requires passenger side mount support cradle, PN CR2569)
- Wranger TJ, 1997-2006 (no cradle required, everything needed is included in this kit)
-
Cherokee XJ, 1991-1996 (also requires passenger side mount support cradle, PN CR2569) -
Cherokee XJ, 1996-2000 (no cradle required, everything needed is included in this kit) - Comanche MJ, 1991-1992 (also requires passenger side mount support cradle, PN CR2569)
|
|
|
|